Product Application
LJZN1-10 current transformer is an indoor epoxy resin cast pillar type full-duty product. It is used for electric energy measurement in power systems with a rated frequency of 50Hz and a rated voltage of 10kV and below. It is installed in a center-mounted switchgear or other types of switchgear.
Implementation Standard
GB/T20840.2-2014
Conditions of Use
● Ambient temperature between -40℃ and 70℃, with a daily average temperature not exceeding 35℃.
● No significant dust, smoke, corrosive gases, steam, or salt contamination.
● Relative humidity: daily average not exceeding 95%, monthly average not exceeding 90%.
● Altitude not exceeding 1000 meters.
Technical Parameters
● Rated insulation level: 12/42/75kV
● Rated secondary current: 5A or 1A
● Power factor of the load: cosΦ=0.8 (lagging)
● Creepage distance: Meets Class II pollution level requirements
● State Grid Standard: Q/GDW10572.2-2023
● Instrument safety factor: FS ≤ 5
Technical Parameter Table
Rated secondary current: 5A, 1A
| Rated primary current (A) | Rated short-time thermal current (KA effective value) | Rated dynamic stability current (KA peak value) | Accuracy class | Rated secondary output (VA) | Creepage distance (mm) | Weight (kg) |
| 20 | 5/2S | 12.5 | 0.2S 0.5S | 15 | 240 | 11 |
| 30 | 8/2S | 20 | ||||
| 40 | 8/2S | 20 | ||||
| 50 | 10/2S | 25 | ||||
| 60 | 10/2S | 25 | ||||
| 75 | 16/2S | 40 | ||||
| 100 | 20/2S | 50 | ||||
| 150 | 20/2S | 50 | ||||
| 200 | 20/2S | 50 | ||||
| 300 | 25/4S | 63 | ||||
| 400 | 25/4S | 63 | ||||
| 500 | 25/4S | 63 | ||||
| 600 | 31.5/4S | 80 | ||||
| 750 | 31.5/4S | 80 |
Dimensional drawing
Keywords
current transformer for measurement
Contact Us
Category
Product Application
LJZN1-10 current transformer is an indoor epoxy resin cast pillar type full-duty product. It is used for electric energy measurement in power systems with a rated frequency of 50Hz and a rated voltage of 10kV and below. It is installed in a center-mounted switchgear or other types of switchgear.
Implementation Standard
GB/T20840.2-2014
Conditions of Use
● Ambient temperature between -40℃ and 70℃, with a daily average temperature not exceeding 35℃.
● No significant dust, smoke, corrosive gases, steam, or salt contamination.
● Relative humidity: daily average not exceeding 95%, monthly average not exceeding 90%.
● Altitude not exceeding 1000 meters.
Technical Parameters
● Rated insulation level: 12/42/75kV
● Rated secondary current: 5A or 1A
● Power factor of the load: cosΦ=0.8 (lagging)
● Creepage distance: Meets Class II pollution level requirements
● State Grid Standard: Q/GDW10572.2-2023
● Instrument safety factor: FS ≤ 5
Technical Parameter Table
Rated secondary current: 5A, 1A
| Rated primary current (A) | Rated short-time thermal current (KA effective value) | Rated dynamic stability current (KA peak value) | Accuracy class | Rated secondary output (VA) | Creepage distance (mm) | Weight (kg) |
| 20 | 5/2S | 12.5 | 0.2S 0.5S | 15 | 240 | 11 |
| 30 | 8/2S | 20 | ||||
| 40 | 8/2S | 20 | ||||
| 50 | 10/2S | 25 | ||||
| 60 | 10/2S | 25 | ||||
| 75 | 16/2S | 40 | ||||
| 100 | 20/2S | 50 | ||||
| 150 | 20/2S | 50 | ||||
| 200 | 20/2S | 50 | ||||
| 300 | 25/4S | 63 | ||||
| 400 | 25/4S | 63 | ||||
| 500 | 25/4S | 63 | ||||
| 600 | 31.5/4S | 80 | ||||
| 750 | 31.5/4S | 80 |
Dimensional drawing
Get a Quote
Through the previous introduction, we believe you have learned enough about us and are confident to cooperate with us. Please leave your information quickly, and we will send you samples or brochures!
Other Products
Contact Us
Service Hotline
Fax
0411-83167110
Address
No. 95, West Section, Century Road, Pulandian District, Dalian City, Liaoning Province
